top of page

Craft, activity and play ideas

Public·3 members

How to Download and Install MIUI 12 on Redmi Note 6 Pro (tulip) with Flash File


How to Download and Flash Redmi Note 6 Pro Flash File




If you own a Xiaomi Redmi Note 6 Pro smartphone, you might have heard of the term "flash file" or "firmware". A flash file is a software package that contains the operating system, applications, and data for your device. Flashing your device means installing a new or updated flash file on it, which can improve its performance, fix bugs, or add new features.




redmi note 6 pro flash file download



However, flashing your device also comes with some risks. You might lose your data, void your warranty, or brick your device if you flash an incompatible or corrupted flash file. Therefore, you should always backup your data, follow the instructions carefully, and use a reliable source for downloading the flash file.


In this article, we will show you how to download and flash Redmi Note 6 Pro flash file using Mi Flash Tool. This tool is an official software from Xiaomi that allows you to flash MIUI ROMs on your Xiaomi devices. You will need a PC, a USB cable, a test point tool, and an unlocked bootloader on your device. Follow these steps to get started.


Requirements




  • A Redmi Note 6 Pro device with an unlocked bootloader. You can check if your bootloader is unlocked by going to Settings > About phone > MIUI version and tapping on it several times. If you see a message saying "You are now a developer", go back to Settings > Additional settings > Developer options and enable OEM unlocking and USB debugging. If you don't see these options, you need to unlock your bootloader first by following this guide .



  • A PC with Mi Flash Tool and Xiaomi USB drivers installed. You can download Mi Flash Tool from here and Xiaomi USB drivers from here . Install them on your PC and run Mi Flash Tool as administrator.



  • A compatible flash file for your device model and region. You can find the latest MIUI ROMs for Redmi Note 6 Pro here . Make sure you download the correct version for your device. For example, if you have a global variant of Redmi Note 6 Pro, you should download the global ROM with the code name "tulip". The file format should be .tgz or .gz. If it is .gz, rename it to .tgz. If it is .zip, extract it and find the .tgz file inside.



  • A USB cable and a test point tool. A test point tool is a metal pin or a tweezer that can short two points on the motherboard of your device. You will need this to enter EDL mode, which is a special mode that allows you to flash your device. You can find the test point location for Redmi Note 6 Pro here .



Steps to Download and Flash Redmi Note 6 Pro Flash File




Step 1: Download the flash file from a reliable source




The first step is to download the flash file from the official MIUI website . You can search for your device model and region and choose the latest stable or beta version. The file size should be around 2 GB. Once you have downloaded the file, check its format and extract its contents if necessary. You should see a folder with several files and subfolders inside. The folder name should be similar to the file name, such as "tulip_global_images_V12.0.1.0.QEKMIXM_20201216.0000.00_10.0_global". This is the flash file folder that you will need in the next step.


Step 2: Connect your device to PC in EDL mode




The next step is to connect your device to your PC in EDL mode. EDL stands for Emergency Download Mode, which is a low-level mode that allows you to flash your device without using the bootloader. To enter EDL mode, you need to use the test point tool and follow these steps:


redmi note 6 pro miui 11 stock rom download


how to flash xiaomi redmi note 6 pro using mi flash tool


redmi note 6 pro tulip global firmware download


xiaomi redmi note 6 pro fastboot rom download


redmi note 6 pro qualcomm hs usb qloader 9008 port


redmi note 6 pro miui 12 update download


how to unbrick redmi note 6 pro with test point


redmi note 6 pro official firmware download


xiaomi redmi note 6 pro recovery mode download


redmi note 6 pro weekly rom download


how to install stock firmware on redmi note 6 pro


redmi note 6 pro android 9 pie update download


xiaomi redmi note 6 pro custom rom download


redmi note 6 pro edl mode flash file download


how to fix boot loop on redmi note 6 pro


redmi note 6 pro stable rom download


xiaomi redmi note 6 pro android 10 update download


how to root redmi note 6 pro without pc


redmi note 6 pro mi account remove file download


xiaomi redmi note 6 pro twrp recovery download


how to unlock bootloader of redmi note 6 pro


redmi note 6 pro oreo firmware download


xiaomi redmi note 6 pro efs file download


how to backup and restore data on redmi note 6 pro


redmi note 6 pro latest security patch download


xiaomi redmi note 6 pro lineage os download


how to flash magisk on redmi note 6 pro


redmi note 6 pro downgrade firmware download


xiaomi redmi note 6 pro pixel experience rom download


how to enable camera2 api on redmi note 6 pro


redmi note 6 pro china firmware download


xiaomi redmi note 6 pro gcam apk download


how to install xposed framework on redmi note 6 pro


redmi note 6 pro india firmware download


xiaomi redmi note 6 pro resurrection remix rom download


how to change font on redmi note 6 pro


redmi note 6 pro russia firmware download


xiaomi redmi note 6 pro havoc os rom download


how to increase battery life on redmi note 6 pro


redmi note 6 pro europe firmware download


xiaomi redmi note 6 pro aosp extended rom download


how to enable dark mode on redmi note 6 pro


redmi note 6 pro indonesia firmware download


xiaomi redmi note 6 pro evolution x rom download


how to disable ads on redmi note 6 pro


  • Power off your device and remove the back cover and the battery.



  • Locate the test point on the motherboard of your device. It should be near the SIM card slot or the USB port. You can use this image as a reference.



  • Short the test point with the test point tool and connect the battery while holding the tool.



  • Connect your device to your PC using the USB cable while still holding the tool.



  • Release the tool and check if your device is detected by your PC in Device Manager. You should see a device named "Qualcomm HS-USB QDLoader 9008" under Ports (COM & LPT) or Universal Serial Bus controllers.



If you don't see this device, try repeating the steps or using a different USB port or cable. If you see this device, congratulations! You have successfully entered EDL mode.


Step 3: Launch Mi Flash Tool and load the flash file




The third step is to launch Mi Flash Tool and load the flash file that you downloaded in step 1. To do this, follow these steps:


  • Open Mi Flash Tool on your PC as administrator.



  • Click on Select button and browse to the flash file folder that you extracted in step 1. Select the folder and click OK.



  • Click on Refresh button and wait for Mi Flash Tool to recognize your device. You should see your device port number in the list, such as "COM10".



  • Choose one of the flashing options at the bottom of Mi Flash Tool. There are three options: Clean all, Save user data, and Clean all and lock. The first option will erase everything on your device, including data, cache, and internal storage. The second option will preserve your data but erase cache and internal storage. The third option will do the same as the first option but also lock your bootloader again. We recommend choosing the first option for a clean flash.



  • Adjust the flashing settings if necessary by clicking on Advanced button. You can change the flash script, flash timeout, or checksum level. We recommend leaving these settings as default unless you know what you are doing.



Step 4: Start flashing and wait for completion




The final step is to start flashing and wait for the process to finish. To do this, follow these steps:


  • Click on Flash button and watch the progress bar at the bottom of Mi Flash Tool. You should see messages such as "sending", "writing", and "success" as the flash file is transferred and installed on your device.



  • Wait for the flashing to complete. It may take several minutes depending on the size of the flash file and the speed of your connection. Do not disconnect your device or interrupt the process until it is done.



  • When the flashing is done, you should see a message saying "The operation completed successfully" or "Flash done" in green color. You can also check the log file for more details.



  • Disconnect your device from your PC and reboot it normally. You may need to press and hold the power button for a few seconds to turn it on.



  • Check the MIUI version and features on your device. You should see the new MIUI version and build number in Settings > About phone. You should also see the new features and improvements that come with the flash file.



Conclusion




You have just learned how to download and flash Redmi Note 6 Pro flash file using Mi Flash Tool. This is a simple and effective way to update or restore your device to the latest MIUI version. Flashing your device can bring many benefits, such as faster performance, better battery life, enhanced security, and more customization options. However, flashing your device also involves some risks, such as data loss, warranty void, or device damage. Therefore, you should always backup your data, follow the instructions carefully, and use a reliable source for downloading the flash file.


If you have any questions or problems with flashing your device, you can visit the official MIUI forum or contact Xiaomi customer service . You can also share your feedback or suggestions with other users or developers on these platforms. We hope this article was helpful and informative for you. Thank you for reading and happy flashing!


FAQs




  • Q: What is the difference between stable and beta ROMs?



  • A: Stable ROMs are official releases that have been tested and verified by Xiaomi. They are stable, secure, and reliable. Beta ROMs are experimental releases that are updated frequently with new features and bug fixes. They are not as stable or secure as stable ROMs and may have some issues or errors.



  • Q: How can I backup my data before flashing?



  • A: You can backup your data using various methods, such as Mi Cloud, Google Drive, local backup, or third-party apps. You can find more details on how to backup your data here .



  • Q: How can I unlock my bootloader?



  • A: You can unlock your bootloader by applying for permission from Xiaomi and using Mi Unlock Tool. You can find more details on how to unlock your bootloader here .



  • Q: How can I root my device after flashing?



  • A: You can root your device by using Magisk or SuperSU. You can find more details on how to root your device here .



  • Q: How can I update my device without flashing?



  • A: You can update your device without flashing by using OTA (over-the-air) updates or Recovery ROMs. You can find more details on how to update your device without flashing here .





About

Welcome to the group! You can connect with other members, ge...
bottom of page